Product introduction:
DMCC3 is mainly for curtain walls, aluminium profiles drilling milling, tapping processing and so on.
Main Feature:
1,Body-integral achieves better heat treatment and stiffness.
2,Body-integral together with electric cabinet makes transportation, installation, and operation easier and higher stability.
3. Sweep collector in the drawing at the bottom makes it easier for cleaning up.
4. Double working section achieves higher efficiency and working station can be customized as clients require.
5. Max. speed of X axis, Y axis, and Z axis can be up to 80m/min, 60m/min, and 60m/min, which achieves highest speed and efficiency among similar machines.
6. Pneumatic clamp circuit adopts original imported flexible pipe which enlarge horizontal scope, suitable for processing a variety of profiles.
7. Point control clamp brake can make sure the operator of the fixture easier to move and position.
8. Cable tanks chain, each axis rails and drive rack, screw with full protective structure, effectively prevent debris from entering the process, improve the life of the drive components greatly.
9. Automatic oil feeding system for maintenance.
10. USA Sagely lubrication system adopts microscale vegetable lubrication oil which is non-toxic and pollution-free improves life of tools.
11. Taiwan CELLS spindle, rotary speed can be up to 12000RPM.
12. Taiwan tool magazine, equipped with 16 tool station, adjacent ATC speed 2.5 seconds.
13. Rigid tapping makes higher process speed and accuracy.
14. Low-speed servo spindle motor maximum output 23.9Nm, speed up to 11000rpm,, fully meet the heavy machining of steel and copper, aluminum processing materials.
15. Disk type facing cutter makes higher surface process efficiency.
16. We adopt Germany PA CNC control system with standard auxiliary hole data base. Operator can directly choose holes and input coordinates for process. Regarding to non-standard holes, operator can program with CADCAM with high practicability.
17. no calibration needed when tool changing, operator can input tool length in CADCAM for program and process. this function achieves easier operation and higher efficiency.
18. automatic sweep remove device optional.
19. bar-code scanner optional. This device can scan label marked on profile, together with CIMS system, saves labor, less mistake and higher efficiency.
STROKE | ||
X(Stroke for X axis) | 7200mm | |
Y(Stroke for Y axis) | 400mm | |
Z(Stroke for Z axis) | 400mm | |
SPINDLE | ||
(Spindle Speed) | 12000 RPM | |
TOOLS | ||
(Capacity Of Tools Magazine) | 16 PCS | |
(Tool Change Time) | 3.0s | |
MOVING SPEED Fanuc PA | ||
X(X Axis Moving Speed) | 52m/min 80m/min | |
Y(Y Axis Moving Speed) | 30m/min 60m/min | |
Z(Z Axis Moving Speed) | 30m/min 60m/min | |
X/Y/Z(X/Y/Z Feeding Speed) | 0~2000mm/min | |
POWER OF MOTOR | ||
(Spindle Driven Motor) | 5.5KW | |
X/Y/Z(X/Y/Z Driven Motor) | 1.8KW, 1.8KW ,1.8KW |
LUBRICATING SYSTEM | |
(Lubricating System) | Bijur |
(Cooling System) | SAGELY |
PRECISION | |
X/Y/Z(Position Precision Of X/Y/Z Axis) | ±0.02mm |
(Repeating Position) | ±0.02mm |
SIXE OF MACHINE | |
(Power Supply) | AC 380V 50Hz |
(Power) | 15 KW |
(Air Pressure) | 0.5MPa~0.8MPa |
(Weight) | 5T |
10000mm×2300mm×2800mm | |
MAIN COMPONENT CONFIGURATION | |
(Operation System) | FANUC,PA |
(Serve Motor) | FANUC, |
(Spindle Motor) | FANUC,CTB |
(Spindle) | CELLS |
(Guide Rails) | THK |
(Bearings) | NSK |
(Ball Screw) | TBI |
(Electrical Parts) | Schneider |
(Pneumatic Components) | AIRTAC,SMC |
(Reducer) | ATG |
Parker was founded in 2003, since the entry into the window door curtain wall machinery manufacturing field, peck with the best team and most stringent manufacturing standards, has been committed to the global supply of machinery and the best service. Today, with more than 300 employees, Parker Industrial Park covers an area of 70000m2, Parker has become Chinese and even the world's window door curtain wall and insulating glass high-end machinery manufacturing base.