Gantry Machining Center Metal Hardware Processing CNC Machine
CNC Machine,CNC Machining Center,CNC Lathe,Horizontal Machining Center,Gantry Machining Center,Five-Axis Machining Center,High Speed Driliing and Tapping Machine,Turning-Milling Compound Machine,High Speed Vertical Machining Center,Hard Track Machining Center, Knife Arrangeing Machine, Knife Tower Machine, Knife Tower Tailstock Machine.
Machine characteristics:
1. The machine adopts the gantry fixed beam frame structure, which maintains good rigidity and precision for a long time, with large torque and good kinetic energy characteristics. Fully absorbed the international advanced machine tool design concept according to processing needs.
2. Key components including bed, column, beam, sliding saddle, ram, table, etc. are all made of high-strength resin sand, high strengthHigh-quality casting, which can withstand heavy cutting and maintain precision for a long time with high stability.
3. Thermally symmetric headstock, high-precision angular contact bearings are mounted on the head and tail of the spindle to ensure rigidity and precision. Using a spindle with increased diameter and thickness, Further increase rigidity. High-power motor drive, high horsepower, high torque, high-precision heavy cutting even at low speeds.
4. The feed system uses an enlarged diameter, pre-stretched ball screw to increase the rigidity of the screw and effectively prevent thermal deformation of the screw.
5. The combination of spiral and chain automatic chip removal structure ensures smooth chip removal.
6. X/Y axis adopts imported super heavy load linear guide rail, Z axis adopts rectangular hardened plastic coated guide rail, low wear and high load, ensuring the long-term use precision of the machine tool, and can greatly improve the precision and rigidity during cutting.
7. The distance between the center of the spindle and the Z-axis guide surface is short, which greatly reduces the turning torque and improves the rigidity. The spindle is modular in design and offers a wide range of functional modules for customer selection for a wide range of machining types.
8. X/Y/Z axis adopts C3 imported ball screw, fixed support at both ends, adopts gearless gap increasing torque synchronous belt transmission, large output torque, fast moving speed and good processing performance; pre-stretching structure, high precision Contact angle precision bearing support with high movement accuracy and excellent thermal stability.
Fuselage configuration:
Skill number paramteters:
Gantry Width (mm) | 1400 | |||
Machine data / Model number | LM-1320/L1320 | LM-1325/L1325 | LM-1330/L1330 | LM-1335/L1335 |
Size of the table (Length×width) (mm) | 1000×2000 | 1000×2500 | 1000×3000 | 1000×3500 |
Table T-slot(number-size ×spacing) (mm) | 7-22/150 | 7-22/150 | 7-22/150 | 7-22/150 |
Table loading capacity (T) | 3 | 4 | 5 | 7 |
Table movement direction stroke (X-axis) | 2000 | 2500 | 3000 | 3500 |
Spindle slide movement direction stroke (Y-axis) | 1400 | 1400 | 1400 | 1400 |
Spindle up and down movement direction stroke (Z-axis) | 800 | 800 | 800 | 800 |
Spindel nose to table surface (mm) | 120-920 | 120-920 | 120-920 | 120-920 |
Spindle speed (rpm) | 6000 | 6000 | 6000 | 6000 |
Spindel drive | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF |
Spindle taper,spindle diameter | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 |
Three-axis motor power(kw) | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 |
Spindle motor power (kw) | 22 | 22 | 22 | 22 |
Z-axis weighting method | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance |
Three-axis feed rate(mm/min) | 10-7000 | 10-7000 | 10-7000 | 10-7000 |
Three-axis fast moving speed(mm/min) | 12/12/10 | 12/12/10 | 12/12/10 | 12/12/10 |
Positioning precision (mm) | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
Repositioning precision(mm) | ±0.003/300 | ±0.003/300 | ±0.003/300 | ±0.003/300 |
Machine weight (T) | 18 | 20 | 24 | 28 |
Machine size(Length×width×height) (mm) | 6500×4500×3800 | 8000×4500×3800 | 9000×4500×3800 | 1000×4500×3800 |
Gantry Width (mm) | 1500 | ||
Machine data / Model number | LM-L2015 | LM-L2515 | LM-L3015 |
Size of the table (Length×width) (mm) | 1100×2000 | 1100×2500 | 1100×3000 |
Table T-slot(number-size ×spacing) (mm) | 7-22/150 | 7-22/150 | 7-22/150 |
Table loading capacity (T) | 3 | 4 | 5 |
Table movement direction stroke (X-axis) | 2000 | 2500 | 3000 |
Spindle slide movement direction stroke (Y-axis) | 1500 | 1500 | 1500 |
Spindle up and down movement direction stroke (Z-axis) | 800 | 800 | 800 |
Spindel nose to table surface (mm) | 70-870 | 70-870 | 120-920 |
Spindle speed (rpm) | 6000 | 6000 | 6000 |
Spindel drive | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF |
Spindle taper,spindle diameter | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 |
Three-axis motor power(kw) | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 |
Spindle motor power (kw) | 22 | 22 | 22 |
Z-axis weighting method | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance |
Three-axis feed rate(mm/min) | 10-7000 | 10-7000 | 10-7000 |
Three-axis fast moving speed(mm/min) | 12/12/10 | 12/12/10 | 12/12/10 |
Positioning precision (mm) | ±0.005/300 | ±0.005/300 | ±0.005/300 |
Repositioning precision(mm) | ±0.003/300 | ±0.003/300 | ±0.003/300 |
Machine weight (T) | 20 | 22 | 25 |
Machine size(Length×width×height) (mm) | 6500×4500×3800 | 8000×4500×3800 | 9000×4500×3800 |
Gantry Width (mm) | 1650 | ||
Machine data / Model number | LM-L1502 | LM-L1503 | LM-L1504 |
Size of the table (Length×width) (mm) | 1200×2000 | 1200×3000 | 1200×4000 |
Table T-slot(number-size ×spacing) (mm) | 7-22/170 | 7-22/170 | 7-22/170 |
Table loading capacity (T) | 3 | 5 | 6 |
Table movement direction stroke (X-axis) | 2000 | 3000 | 4000 |
Spindle slide movement direction stroke (Y-axis) | 1650 | 1650 | 1650 |
Spindle up and down movement direction stroke (Z-axis) | 800 | 800 | 800 |
Spindel nose to table surface (mm) | 115-915 | 115-915 | 115-915 |
Spindle speed (rpm) | 6000 | 6000 | 6000 |
Spindel drive | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF |
Spindle taper,spindle diameter | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 |
Three-axis motor power(kw) | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 |
Spindle motor power (kw) | 22 | 22 | 22 |
Z-axis weighting method | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance |
Three-axis feed rate(mm/min) | 10-7000 | 10-7000 | 10-7000 |
Three-axis fast moving speed(mm/min) | 12/12/10 | 12/12/10 | 12/12/10 |
Positioning precision (mm) | ±0.005/300 | ±0.005/300 | ±0.005/300 |
Repositioning precision(mm) | ±0.003/300 | ±0.003/300 | ±0.003/300 |
Machine weight (T) | 26 | 30 | 32 |
Machine size(Length×width×height) (mm) | 6500×4500×3800 | 8500×4500×3800 | 10500×4500×3800 |
Gantry Width (mm) | 1700 | |||
Machine data / Model number | LM-L2017 | LM-L2517 | LM-L3017 | LM-L4017 |
Size of the table (Length×width) (mm) | 1500×2000 | 1500×2500 | 1500×3000 | 1500×4000 |
Table T-slot(number-size ×spacing) (mm) | 7-22/150 | 7-22/150 | 7-22/150 | 7-22/150 |
Table loading capacity (T) | 4 | 5 | 6 | 8 |
Table movement direction stroke (X-axis) | 2000 | 2500 | 3000 | 4000 |
Spindle slide movement direction stroke (Y-axis) | 1700 | 1700 | 1700 | 1700 |
Spindle up and down movement direction stroke (Z-axis) | 800 | 800 | 800 | 800 |
Spindel nose to table surface (mm) | 150-950 | 150-950 | 150-950 | 150-950 |
Spindle speed (rpm) | 6000 | 6000 | 6000 | 6000 |
Spindel drive | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF | Belt/Gear/ZF |
Spindle taper,spindle diameter | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 | BT50/Ø190 |
Three-axis motor power(kw) | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 | 7/4.5/4.5 |
Spindle motor power (kw) | 22 | 22 | 22 | 22 |
Z-axis weighting method | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance | Oil Pressure + Nitrogen Balance |
Three-axis feed rate(mm/min) | 10-7000 | 10-7000 | 10-7000 | 10-7000 |
Three-axis fast moving speed(mm/min) | 12/12/10 | 12/12/10 | 12/12/10 | 12/12/10 |
Positioning precision (mm) | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
Repositioning precision(mm) | ±0.003/300 | ±0.003/300 | ±0.003/300 | ±0.003/300 |
Machine weight (T) | 22 | 22 | 24 | 28 |
Machine size(Length×width×height) (mm) | 6500×4500×3800 | 8000×4500×3800 | 8500×4500×3800 | 10500×4500×3800 |
Why Choose ShiXingHong CNC Machinery?
1.National high-tech enterprises
2.Guangdong famous brand products
3.Shenzhen famous brand
4.Has 20 years of professional CNC machine tool development and manufacturing experience.
5.To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Company Profile:
Shenzhen Shixinghong Precision Machinery Equipment Co., Ltd. is a comprehensive technology enterprise specializing in the development, manufacture, sales and service of CNC machine tools.The company has a professional technical team dedicated to the field of CNC machine tool manufacturing. It has nearly 20 years of experience in R&D and manufacturing of professional CNC machine tools. With strong technical force, advanced processing equipment and scientific management, the company's machine tools have gained market. Widely recognized.The company has seven major products: five-axis machining center series,
high-speed drilling and tapping machine series, vertical machining center series, horizontal machining center series, gantry machining center series, engraving and milling machine series, CNC lathe series.The high-speed drilling and tapping machine series and the three-axis rail high-speed machining center in the vertical machining center series are our re-launch products. The series of high-speed, high-rigidity, high-performance and high-efficiency features quickly become The preferred machine tool for communications, consumer electronics,medical, LED, automotive, aerospace and other industries.
Corporate headquarters:
Shenzhen shixinghong precision machinery equipment Co.,Ltd is a national high-tech enterprise. The company is the Guangdong famous brand products,Shenzhen famous brand,enterprise is the shenzhen machinery industry association, vice President of enterprise, business association, vice President of enterprises in shenzhen city, Shenzhen polytechc practice base, Hengyang technical college,Zhongshan Torch polytechnic practice base, the enterprise has several national patents, and won the "national AAA grade credit enterprise", "independent innovation demonstration enterprises of guangdong province" and "top ten service unit of guangdong province" "shenzhen machinery industry best employer units" and other honorary titles.
Branch-1
Chongqing Shixinghong Precision Machinery Equipment Co., Ltd. is located in Hechuan District, Beidamen, Chongqing. Since its inception, Chongqing Company has rapidly grown into a representative high-precision CNC machine tool provider in the southwest of the country.
Branch-2
Shenzhen Shixinghong Technology Co., Ltd. is a technology enterprise invested and controlled by Shenzhen Shixinghong Precision Machinery Equipment Co., Ltd. The company is committed to the R&D, design, production and manufacture of CNC machine body and overall appearance sheet metal.
"Creating value for customers, creating opportunities for employees, and creating benefits for the society" is our business philosophy. " Professional service, sincerity and truth" is our service concept, providing customers with high quality with perfect customer service system. Pre-sale, in-sale, after-sales service and professional technical support are our mission.
Sincerely hope to work together with all new and old customers to create a better tomorrow!
Company Team:
Packing And Shipping:
Our Clients:
Our Suppliers:
Enterprise Honor Certificate:
Before and after sales:
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
(1) installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
(2) technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
(3) warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
(4) service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
(5) technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
(6) supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.